Mode Functions - Panasonic DP-130 Operating Instructions Manual

Mode Functions

18
Energy Saver Mode/Sleep Mode
Energy Saver Mode
# To enter this mode
Press Energy Saver key. The indicator will flash.
Automatically enters after 15 minutes from the last copy.
$ To cancel this mode
Press Energy Saver key again.
Sleep Mode
# Automatically enters after 30 minutes from the last copy.
Power consumption will drop and the Energy Saver key indicator will light.
$ To cancel this mode.
Press Energy Saver key.
If you wish to change the above settings or if you need more information, call your Panasonic
authorized dealer.
Normal Operation
Energy Saver mode
Sleep Mode
Toner Saver Mode
# To enter this mode.
Press and hold % Select key, then press Paper Tray key.
$ To cancel this mode.
Press and hold % Select key, then press Paper Tray key.
This Toner Saver Mode is to save toner consumption by copying dark originals lighter.
The exposure indicator "LIGHTER" flashes when Toner Saver Mode is on.
Auto Start function
While the copier is warming up, you may position your original on the copier, enter your copy job
selections and press the Start key. The Wait indicator (Start key) will flash until the warm up
cycle is completed, then the copy job will automatically start.
Note: Please enter your copy job, when "1" appears in the display.
Total Counter
The total counter in this copier is electronic. It can be read from the Control Panel. To read the
counter follow these steps:
# Press and hold the % Select Key, then press the Clear/Stop Key.
The Control Panel will display the first set of 3 digits, then it will display the second set of 3
digits.
$ When placed next to each other, you have your reading.
Example: 1st set 012, then the 2nd set 345. You have made 12,345 copies.
Power Consumption
Approximately 60 Wh
Approximately 35 Wh
Approximately 1.5 Wh
Recovery warm up time
None
5 seconds
20 seconds