Operator Control At The Device - Siemens SITOP PSU8600 Manual

Operator control at the device

Operating the basic devices
Various settings can be made using the operator controls, potentiometers
buttons
Note
Settings made at the basic device using the voltage potentiometer
②
and DIP switches
REMOTE operating modes (Page 59)). These operator controls are deactivated in the
REMOTE mode.
The outputs can be switched-on/switched-off and reset in any mode using buttons
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76
③
and selector switches
⑤ ⑪
- are only made in the MANUAL mode (see MANUAL and
④ ⑪
- . All operator controls are located at the front.
3
① ②
and ,
①
, current potentiometer
③
.
51