Repeater List - Kenwood TH-D74A User Manual

REPEATER LIST

Up to 1,500 repeaters can be registered in the repeater list.
Displaying the Repeater List
1 Access Menu No. 210.
World region selection screen appears.
2 Select a World region and press [ENT].
Country region selection screen appears.
3 Select a Country region and press [ENT].
Group selection screen appears.
4 Select a group and press [ENT].
Repeater list selection screen appears.
5 Select a repeater and press [ENT].
Repeater details screen is set.
6 Press [PTT] to return to the frequency screen.
Sorting the Repeater List
1 Press [MENU] in the Repeater list selection screen.
Repeater list menu screen appears.
2 Select [Move] and press [A/B].
Move position selection screen appears.
3 Select move position and press [A/B].
If you move an item to the end of the list, select [Move to
End] and press [A/B].
Editing the Repeater List
You can edit the repeater information.
1 Press [MENU] in the Repeater list selection screen.
Repeater list menu screen appears.
2 Select [Edit] and press [A/B].
Repeater list editing screen appears.
3 Select an item and press [ENT].
Editing screen of the selected item appears.
4 Press [A/B] after editing.
Editing is completed and the Repeater list selection screen
appears.
Note:
◆ If you do not confirm the editing by pressing [A/B], the changes
will not be saved.
Repeater List Editing Menu
Editing Menu
Name editing
Edit the repeater name.
screen
Sub Name editing
Edit the repeater sub-name.
screen
Callsign editing Edit the repeater Callsign or Gateway
screen Callsign.
Frequency editing Edit the frequency. The frequency is corrected
screen at 5 kHz step.
Shift editing screen Select [Off], [Plus], or [Minus].
Offset editing Edit the frequency. The offset frequency is
screen corrected at 5 kHz step..
Position accuracy
Select [Invalid], [Approximate], or [Exact].
editing screen
Latitude editing
Edit the latitude.
screen
Longtitude editing
Edit the longtitude.
screen
Time zone editing
Edit the time zone.
screen
Lockout selecting
Set [On] or [Off] to the repeater lockout.
screen
Clearing the Repeater List
You can clear the specific repeater in the repeater list.
1 Select the repeater in the repeater list selection screen.
2 Press [MENU].
Repeater list menu screen appears.
3 Select [Clear] and press [A/B].
The confirmation screen appears.
4 Press [A/B].
The repeater is cleared and repeater list selection screen
appears.
Adding the Repeater List
You can add the repeater information.
1 Press [MENU] in the repeater list selection screen.
2 Select [Add] and press [A/B].
Repeater list menu screen appears.
3 Select an item and press [ENT].
Editing screen of the selected item appears.
4 Press [A/B] after editing and adding.
Editing and adding are completed and the Repeater list
selection screen appears.
• When you want to add a simplex
frequency information in the repeater list for using the
DR mode Reflector menu, input the string "DIRECT"
both for [Callsign] and [Gateway] entry fields as follows.
16-14
Operation
DV Access Point's