Kenwood TH-D74A User Manual page 116

Voice Guidance (Auto1/Auto2)
Voice guidance in Auto1/ Auto2 is automatically announced based on the following operations or status.
Operation or status
Change to VFO mode
Change to Memory Channel mode
Change to Call mode
Change of the frequency band
Change of the demodulation mode
Change of the memory channel
Change of the memory group
Frequency direct entry mode
Frequency direct entry by 12 keypad
Change of the operation band
Function select mode
Change of FINE mode
MHz mode and change of the frequency
Step frequency and FINE step frequency setup
Change of the Lock function
Change of Single Band/ Dual Band
Change of Attenuator
Squelch adjustment
Change of transmit output power
Change of Reverse function
Change of Shift direction
Selection of Tone/CTCSS/DCS/Cross Tone function
Selection of Tone frequency, CTCSS Frequency, and
DCS code
Selection of Cross Tone combination
Memory channel registration
Memory channel registration in selecting the channel
to store
Memory channel list
Call channel list
FM radio memory channel list
Selection of the channel in various channel lists
Selection of the direct channel by 12 keypad
Various channel list menu
VOX gain adjustment in frequency screen
VOX delay time adjustment in frequency screen
Change of APRS/KISS mode
Change of TX Beacon function
Change of Object TX function
"VFO" + Frequency
"Memory" + Channel number
"C"
Mode + Frequency
Mode
"Channel" + Channel number + Frequency
"Group" + Group number + Channel number
"Enter"
Entry number
VFO: Operation band + "VFO" + Frequency
VFO and DR mode: Operation band + "VFO" + Frequency + Callsign
Memory channel: Operation band + "Memory" + Channel number
Call channel: Operation band + "C"
DR mode: Operation band + Callsign + Repeater Callsign
"F"
"On/Off"
MHz Number + "Megahertz"
Step frequency
"Lock" + "On/Off"
Single Band: "S" + Guidance of the operation band change
Dual Band: "D" + Guidance of the operation band change
"On/Off"
Squelch startup: "SQL" + Level
Level adjustment: Level
Transmit output power
"On/Off"
"Plus/Minus/Off"
"Tone/CTCSS/DCS/Cross Tone/Off"
Selected frequency or code
DCS/Off: "TX DCS" + "RX Off"
Tone/DCS: "TX TONE" + "RX DCS"
DCS/CTCSS: TX DCS + RX CTCSS
Tone/CTCSS: TX TONE + RX CTCSS
"Memory In" + Channel number + Frequency
Channel number + Frequency
"Channel List" + Channel number + Frequency
Channel number + Frequency
Entry number
Startup: "Memory Menu Edit"
Selecting Edit: "Edit"
Selecting Memory Shift: "Shift"
Selecting Clear Memory: "Clear Memory"
Selecting Clear Group: "Clear Group"
"VOX Gain" + setting value
"VOX Delay" + setting value
APRS mode: "A" + "On"
KISS mode: "K" + "On"
Off: "Off"
On: "TX" + "BCN"
On: "TX" + "OBJ"
23-2
Guidance