Miscellaneous - Xerox 700 Digital Color Press User Manual

Xerox 700 Digital Color Press

Miscellaneous

• System requirements messages (for example, "Order Waste Toner Container," "Hole Punch Waste Container
Full") may occasionally be blocked by the current UI screen. Close the Job Status screen and open the Machine
Status/Supplies screen to check consumable status.
• If the machine stops running mid-job, or does not begin printing after a job is submitted, check the Machine
Status/Supplies screen to determine if supplies need to be replaced. The system will stop if sufficient supplies
are not available for a submitted job. If the problem persists, check the Machine Status/Fault screen, select the
fault, and click on the Instructions button.
• If the machine stops running mid-job, or does not begin printing after a job is submitted, verify that the
applicable paper tray is not empty. The system will stop if sufficient media is not available for a submitted job.
If the problem persists, check the Machine Status/Fault screen, select the fault, and click on the Instructions
button.
• The system does not prohibit duplexing coated substrates from the internal trays (Trays 1-3); however, there
can be a significant increase in jams or multi-feeds. If large quantities of coated paper are to be run, and if it is
available, the optional OHCF is recommended for paper feeding.
• When using heavy coated 11 x 17 in./A3 stock, closing Trays 1-3 with too much force will result in a paper size
misread. Open and close the tray gently to allow the paper sensors to correctly identify paper size.
• If the adjustment arms are disturbed while re-loading paper in Tray 5 (Bypass), the paper size setting will
return to default and cause job to stop until the paper size setting is corrected by the user.
User Guide
Downloaded From ManualsPrinter.com Manuals
Problem Solving
8-53