Dmx Channel Modes, Assignments, And Values; 10-Channel - Chauvet Scorpion Dual User Manual

DMX Channel Modes, Assignments, and Values

10-Channel

Channel
•
•
•
Scorpion™ Dual User Manual Rev. 2
Function
1 Control Functions
2 Strobe
3 Pattern Selection
4 Zoom
5 Y-Axis Rolling
6 X-Axis Rolling
7 Z-Axis Rolling
8 Pan
9 Tilt
10 Scan Speed
For manual operation of lasers using DMX control, be sure Channel 1 is set to
DMX mode (000—085).
For automatic operation of lasers using DMX control, be sure Channel 1 is set to
Auto program (086–170).
Channel 2 must be set to 010–255 for Channel 1 to be operational.
Value Setting
000  085 DMX mode (other channels activated)
086  170 Auto program
171  255 Sound-Active
000  009 No function
010  249 Slow to fast
250  255 On
000  255 Patterns as shown in
000  127 100%–5%
128  169 Zoom in
170  209 Zoom out
210  255 Zoom in and out
000  127 Fixed position on y-axis (0 to 359°)
128  191 Clockwise rolling, slow to fast
192  255 Counter-clockwise rolling, slow to fast
000  127 Fixed position on x-axis (0 to 359°)
128  191 Clockwise rolling, slow to fast
192  255 Counter-clockwise rolling, slow to fast
000  127 Fixed position on z-axis (0 to 359°)
128  191 Clockwise rolling, slow to fast
192  255 Counter-clockwise rolling, slow to fast
000  127 Fixed position (128 horizontal points)
128  191 Clockwise movement, slow to fast
192  255 Counter-clockwise movement, slow to fast
000  127 Fixed position (128 vertical points)
128  191 Clockwise movement, slow to fast
192  255 Counter-clockwise movement, slow to fast
000  127 Fast to slow (manual)
128  169 Slow to fast (automatic)
170  209 Fast to slow (automatic)
210  255 Fast to slow, then slow to fast (automatic repeat)
Patterns table.
Page 17 of 66