Panel Apl / Abl; Scroll Bar - Panasonic TC-42P1 Service Manual

Panel APL / ABL

1) Confirm each data.
SG Hold
SG Hold is the alignment tool for data copy function. Color/Signal system can be set regardless of input signal.
Aging
Aging mode is internal pattern generator for panel setting confirmation and the image retention removal.
Panel Color
There are 4 color pattern White, Red, Blue and Green.
1) Access desired color pattern by the Volume Up or Down button on the remote control and press the
ACTION (PT models)/ STR (TC models) button.
2) To exit, press Menu button.

Scroll Bar

Scroll bar is for the image retention removal.
Display scroll bar approximately 15 minutes after alignment is completed.
1) Access the Scroll bar menu by Left or Right button of cross button and press the
ACTION (PT models)/ STR (TC models) button.
2) To exit, press the Menu button.
Note:
CAT (Computer Aided Test) mode
Mode
IIC
CD (Complete Diagnostics)
IT (Integrated Text)
SD (Status Display)
OSD on/off
ID (Initial Data)
Alignment Item Reference
APL Shift Level E2
ABL Point 10
ABL Gain E0
ABL Bank Select 3F
Function
Service Alignment
Software version information
EEP ROM edit
Not used
Factory use
OSD display switch
Not used
CAT
IIC Mode
CD Mode
I T Mode
SD Mode
OSD On/Off
ID Mode
- 18 -
Setting/Special feature
Confirmation only
Confirmation only
Confirmation only
Confirmation only
Access button
ACTION (PT models)/ STR (TC models)
MUTE
MUTE
sys8.0
0
< Scroll Bar > < Scroll Bar >