Sunbeam EM7100 Instruction/Recipe Booklet page 21

Advanced Programming continued
To indicate you have activated the
programmability of the power saving mode,
a light on one of the buttons will illuminate;
1 CUP = Power down after 1 hour of
inactivity and then turn off after a further
4 hours of inactivity (Factory setting)
2 CUP = Turn off after 26 hours of
inactivity
CAPSULE = Does not turn off
MANUAL = Turn off after 8 hours of
inactivity
POWER = Turn off after 30 minutes of
inactivity
This light will remain on for up to 5 seconds
before automatically returning to factory
settings if no action is taken. The espresso
machine will then power on.
4.PRESS and RELEASE one of the buttons
below depending on the power saving mode
desired;
26 hours = PRESS the 2 CUP button
Does not turn off = PRESS the CAPSULE
button
8 hours = PRESS the MANUAL button
30 minutes = PRESS the POWER button
When the new power saving mode setting has
been selected the espresso machine will beep
twice.
5.The espresso machine will then
automatically power on.
Figure 2
19