Choosing A Location - VeriFone ruby2 Installation Manual

Choosing a Location

The Ruby2 workstation is generally placed on an easily accessible
countertop. Consider the following when deciding on a location.
■
■
■
■
■
In addition, the location must meet the following requirements:
■
■
■
Avoid locations with the following characteristics:
Warning:
■
■
■
■
October 01, 2013
Allow adequate ventilation around the unit.
All cables must easily reach their connecting devices.
Consider the height requirements to determine the pole height for
the customer display.
Make sure that there is sufficient clearance for both the drawer
and the cashier.
Make sure that power cords are not in the direct path of foot
traffic.
Power: 100-240V~, 50/60 Hz 3.0 Amps
Temperature:
– Operating: 32 to 104° F (0 to 40° C)
– Non-operating: -4 to 140° F (-20 to 60° C)
Humidity: 15% to 95% relative humidity at 40° C (non-condensing)
To reduce the risk of fire, do not place the Ruby2 near objects
that produce excessive heat.
Direct sunlight
Moisture
Excessive dust
Electrical "noise" or devices that cause excessive voltage variations
such as air conditioners, fans, or high frequency security systems
Ruby2 Hardware Installation Guide
7