Requirements - VeriFone ruby2 Installation Manual

Ruby2 Hardware Installation Guide

Requirements

Note:
The Commander Site Controller and Ruby2 workstation must be
installed by a VeriFone Authorized Service Contractor (VASC).
Software
■
Hardware
■
■
■
Cables
■
■
■
■
Recommended Equipment
■
■
■
■
■
■
2
Commander Site Controller Software Suite
Commander Site Controller (The Commander Site Controller may
also be used to install the Ruby2.)
Ruby2 Workstation and Thermal Receipt Printer
An intranet infrastructure, or Cable/DSL Ethernet router, or
network. The number of workstations determines the number of
network switch ports required.
Ethernet cable from each Ruby2 to the network switch and/or
router
If a network switch is used, an additional Ethernet cable to the
router
RS-232 cable between peripherals, such as printers
Null Modem Adapter
Uninterruptible Power Supply (UPS) - VeriFone recommends that
the Ruby2 be connected to a UPS with a rating of 200VA or greater.
Customer Display Pole
Cash Drawer
PINpad
Scanner
Printer
October 01, 2013