Connecting External Components - JVC KW-V41BT Instruction Manual

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting a USB device/iPod/iPhone
iPod nano (7th iPod/iPhone except
Generation)/ for iPod nano (7th
iPod touch (5th Generation)/iPod touch
Generation)/iPhone (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5 5S/iPhone 5C/iPhone 5
(commercially available)
KS-U62
(optional accessory)
USB device
0.8 m
(commercially
available)
USB 2.0 cable
(accessory of the
iPod/iPhone)
KW-V21BT
KW-V41BT
KW-V11
0.8 m
(Front panel)

Connecting external components

(commercially available)
1 iPod/AV-IN
• Connect the following type of 4-pole mini
plug:
1 3
24
0.8 m
2 Video output (Yellow)
3 Rear preout*
• Audio left output (White)
KS-U59 (optional
• Audio right output (Red)
accessory)
4 Front preout*
1.8 m
• Audio left output (White)
• Audio right output (Red)
5 Subwoofer preout (monaural output)*
• Subwoofer left output (White)
• Subwoofer right output (Red)
6 NAV input for an external navigation unit*
7 Steering wheel remote controller input
• Connect to the vehicle's steering remote
harness. Contact your JVC dealer for details.
8 Rear view camera input (Yellow)
1 Left audio
2 Right audio
3 Ground
4 Composite video
1
1
1
2
* When connecting an external amplifier, connect its ground wire to
1
the chassis of the car; otherwise the unit may be damaged.
* Only for KW-V41BT/KW-V21BT.
2
Connecting microphone for Bluetooth
(only for KW-V41BT/KW-V21BT)
Connect the microphone (6) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
6
ENGLISH 45