Table of Contents
Advertisement
Connecting video components
Do not connect the AC power plug to the wall outlet until all connections are completed.
This receiver is equipped with the following video terminals—
composite video, S-video, and component video terminals.
• If your video components have S-video (Y/C-separation) and/or
component video (Y, P
, P
) jacks, connect them using an S-
B
R
video cable (not supplied) or component video cable (not
supplied). By using these terminals, you can get a better picture
quality in the order:
Component > S-video > Composite
IMPORTANT:
The video signals from one type of these input jacks are
transmitted only through the video output jacks of the same
type. Therefore, if a recording video component and a playing
video component are connected to the receiver through the video
terminals of different type, you cannot record the picture. In
addition, if the TV and a playing video component are connected
to the receiver through the video terminals of different type, you
cannot view the playback picture on the TV.
7 Connecting a DVD recorder or DVD player with its stereo output jacks:
COMPONENT VIDEO
Y
P
B
P
R
VCR(DBS)
DVR/DVD
MONITOR
IN
IN
OUT
220V
110V
230 -
127V
240V
DVR
DVR/DVD
OUT(REC)
IN(PLAY)
NOTES
•
When connecting a DVD recorder or DVD player to the component video
input jacks, select the component video input mode (DVD VIDEO IN)
correctly. If you do not, you cannot view the playback picture on the TV or
the AV COMPU LINK remote control system cannot operate properly. See
page 20 for details.
• Select the analog input mode. See "Selecting the analog or digital input
mode" on page 12.
•
You can enjoy digital sound if using a digital coaxial or optical cable. When
shipped from the factory, the audio input mode for a DVD recorder and
DVD player is set to use the digital coaxial terminal (DIGITAL IN 1 (DVR/
DVD)). For details of digital connection, see page 10.
Green
Blue
Red
DVR
DVR/DVD
White
OUT(REC)
IN(PLAY)
Red
Red
White
S-video cable (not supplied)
Composite video cable
(not supplied)
Turn off all components before making connections.
• When you connect other components, refer also to their
manuals.
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this receiver, the
sound output through this receiver may be distorted.
If your video components have AV COMPU LINK terminal
See also page 32 for detailed information about the connection
and the AV COMPU LINK remote control system.
Component video cable (not supplied)
ı
Ç
Stereo audio cable
(not supplied)
Composite video cable
(not supplied)
Å To component video output
• Connect Y, P
B
ı To left/right audio channel output
Ç Only for DVD recorder: To left/right audio
channel input
Î To composite video output
‰ To S-video output
Ï Only for DVD recorder: To S-video input
Ì Only for DVD recorder: To composite video
input
Å
DVD recorder or
DVD player
Î ‰ Ï Ì
, and P
correctly.
R
7
Advertisement
Table of Contents
