Resin Regeneration - Where The Water; Softner Is Provided - Saeco SG200E Operation & Maintenance Manual

English
9.5 Resin regeneration (where
the water softener is
provided)
Resin regeneration is to be carried out according
to the water of the system to which the dispenser
is connected.
Use the table below as a reference:
WATER HARDNESS SELECTION NUMBER
°French
10
20
30
40
50
The appropriate kits available on the market can
be used to check water hardness and therefore
the times and modes for intervention.
The operation can be carried out as follows:
- power the machine off
- turn the lower tap taking care to place the
related hose into a bucket or better into a drain
system (fig.63).
fig.63
54
130cc
60cc
25000 12500
6000
12500
4500
9500
6500 3000
5000 2500
- remove the cover and introduce 1.5 kg salt
- refit the cover
- turn the machine on and drain the water until
it is no longer salty
- power the machine off and close the tap.
This operation takes about 30/45 minutes.