Payment System Installation On The Cabinet - Saeco SG200E Operation & Maintenance Manual

7.2 Payment system installation
on the base cabinet
The base cabinet has no payment system. The
responsibility for possible damages to the
machine and other objects and for personal
injuries caused by an incorrect installation of the
payment system falls on the person who installed
the system.
- remove or turn the coiner supporting plate
(fig.38, ref.1)
- hook and secure the coiner to the support
(fig.38, ref.2)
- reassemble and lock the support to the
cabinet door (fig.38, ref.3)
fig.38, rif.1
fig.38
- connect the coiner to the CPU card
NOTE: Executive, MDB and BDV serial systems
are connected to the CPU card using a cable
and an interface in necessary, both included in
the special kit.
- Then enter the programming menu so as to
choose convenient settings.
See section 8 ‘PROGRAMMING AND
MAINTENANCE MENU’ in order to check
parameter setting, which should be in line with
the system used.
fig.38, rif.3
English
fig.38, rif.2
25