Measurement Notes; Static Or Dynamic Measurement Procedure - Hach 2100AN IS User Manual

Measurement notes

Before measurement, select the printer to use and the print time interval.
Refer to Configure the printer output

Static or dynamic measurement procedure

1. Push PRINT to turn 2. Install the automated
the print interval feature flow cell. Refer to
on. a flow cell
The PRINT light turns Note: The sample cell
on. cover does not close
when the flow cell is
installed.
34 English
on page 36.
3. Push FLOW.
Install
The FLOW light turns
on page 31.
on.
4. Push the up and 5. Push ENTER.
down arrow keys to
The display shows
select STAT (static) or
"MM-SS FIL" (or an
DYN (dynamic).
actual fill time if a fill
time has been selected
previously).
6. Push the arrow keys
to select the fill time.