Cm Skip Time Setting - Samsung DVD-R157 Instruction Manual

DVD-Recorder
No Disc
Timer Rec.
Control
Connection
Setup
CH Digit Lock
Mode for SET button : Off
Brand Code
MOVE ENTER
DVD-Recorder
No Disc
Timer Rec.
Control
Connection
Setup
CH Digit Lock
Mode for SET button : Off
Brand Code
MOVE ENTER
DVD-Recorder
No Disc
Timer Rec.
Control
Setup Connection
CH Digit Lock
Mode for SET button : Off
Brand Code
MOVE ENTER
DVD-Recorder
DVD-RW(VR)
Title List
Set Top Box Control
CM Skip Time
Playlist
EP Mode Time
Disc Manager
Chapter Creator
Timer Rec.
Quick Recording
Setup
Anynet+(HDMI-CEC) : On
MOVE ENTER
CM SKIP
Downloaded From Disc-Player.com Samsung Manuals
CH Digit Lock
Select the sub item(Off or Lock to two digits) using the ▲▼ buttons,
Set Top Box Control
then press the ENTER button.
: Off
►
• Off : Select this when your cable box or satellite receiver only accepts a
: AV1
►
three or more digit channel number. Normally select this.
: Off Off
►
Lock to two digits ►
• Lock to two digits : Select this when your cable box or satellite receiver
: 0000
►
only accepts a two digit channel number.
RETURN EXIT
Mode for SET button
Select the sub item(Off, Mode 1 or Mode 2) using the ▲▼ buttons, then
Set Top Box Control
press the ENTER button.
: Off
►
Select "Mode 1" or "Mode 2" if your cable box or satellite receiver requires
: AV1
►
pressing the SET button, after entering the channel number.
: Off
►
Off
►
• Off : No code is sent when the SET button is pressed. Normally select this.
: 0000
Mode 1 ►
• Mode 1 or Mode 2 : Sends the channel number you entered.
Mode 2
RETURN EXIT
Brand Code
Set Top Box Control
Enter the brand code of your cable box or satellite receiver using the
number buttons, then press the ENTER button.
: Off
►
(See "Cable Box/Satellite Receiver Brand Code Table" on pages 75~77.)
: AV1
►
: Off
►
►
: 0000
►
RETURN EXIT
▌

CM Skip Time Setting

When a program recorded on a DVD-RAM, a DVD-RW, DVD-VIDEO or
a DVD-R is played, the unit can be set to automatically skip a portion
System
of the program corresponding to a CM(commercial) Skip Time set by
►
the user.
: 15 Sec 15 Sec
►
30 Sec
: 6 Hours
►
1. With a disc inserted and the unit in Stop mode, press the MENU button
60 Sec
: Off
►
on the remote control.
: Off
►
►
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
RETURN EXIT
You can't use the Setup functions while playing a disc.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select CM Skip Time using the ▲▼ buttons, then press the ENTER or
► button.
CM Skip Time will be displayed.
5. Select the desired time using the ▲▼ buttons, then press the ENTER
or ► button.
6. If you press the CM SKIP button during playback, the section
corresponding to the set time is skipped, and then the next section is
played.
■ If "Mode 1" does not work, try "Mode 2."
■ If your cable box or satellite receiver does not respond to either
setting, contact the manufacturer of the cable box or satellite
receiver.
■ If you cannot get the recorder to control your cable box/satellite
receiver. Check the connection and position of the IR Blaster
cable. (page15)
If your cable box or satellite receiver still does not operate with
this recorder, contact your cable company to see if they can
provide you with a compatible cable box or satellite receiver.
English - 28