Common Packets; Packet 01: Interactive Diagnostic Routine; Packet 05: Transfer Serial Number - VeriFone MX800 series Programmer's Manual

Common
Packets
Packet 01:
Interactive
Diagnostic Routine
Packet 01 Length:
Packet 01 Example:
Packet 05: Transfer
Serial Number
Packet 05 Length:
Packet 05 Example:
This section presents the packets common to all protocols.
Packet 01 has the IPP run a specified self-diagnostic test. Information on the test
in progress is provided using response packets 9 and 14, depending on the
selected test.
Table 29 Packet 01 Format
Data Element Characteristic
<SI> 1H
Packet Type 2AN
Diagnostic # [dd] 2N
<SO> 1H
1H
{LRC}
•
MAX: 7 characters
•
MIN: 7 characters
Send the IPP the request to run diagnostic test 1, RAM test/one time:
<SI>0101<SO>{LRC}
The master device uses this packet to transfer a serial number to the IPP.
Table 30 Packet 05 Format
Data Element Characteristic
<SI> 1H
Packet Type 2AN
[vvv] 3AN
[dddddd] 6N
[p] 1AN
[bb] 2AN
[nnnn] 4N
<SO> 1H
1H
{LRC}
•
MAX: 21 characters
•
MIN: 21 characters
Set the IPP serial number to 246880401A001234:
<SI>05246880401A001234<SO>{LRC}
IPP MS DUKPT C
AND
Comments
Shift In, Value: 0Fh
Value: 01
2-byte ASCII code of the diagnostic test to run.
Shift Out, Value: 0Eh
Error check
Comments
Shift in, value: 0Fh
Value: 05
PINpad version number
Release date -- format: YYMMDD
Production facility code
Production batch code
Serial # for group ID 0001–9999
Shift out, value: 0Eh
Error check
X
M 800 S
ERIES
P
OMMUNICATIONS ACKETS

Common Packets

289
P G
ROGRAMMERS UIDE