4. Installation Requirements
1) Space Requirements
The cooler's installation requires an unobstructed space of 140mm(length),
126mm(width), and 160mm(height), with the CPU as a central reference
point. Please check if components such as ODDs and PSU protrude into the
required space.
2) Air Guide Removal
Air guides on enclosures must be removed before the cooler's installation
since they protrude into the cooler's required space.
160 mm
3) Cooler Orientation
Install the cooler's fan bracket close to the rear fan of the case, so that the
air passing through the cooler comes out through the rear fan of the case,as
shown in the image.
Case Exhaust Rear Fan
WWW.ZALMAN.COM
126 mm
140 mm
Fan Bracket
Air Guides
Case Cover
MotherBoard
3