Advertisement
1. Precautions
1)
Avoid inserting objects or hands into the fan while it is in operation to prevent
product damage and injuries.
2)
Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If
contact is made with skin, wash off with water. If ingested or irritation persists,
seek medical attention.
3)
To prevent possible injuries, gloves must be worn while handling this product.
4)
Excessive force exerted on the fan may cause damage to the fan and/or
system.
5)
Use and keep product away from reach of children.
6)
Check the components list and condition of the product before installation. If
any problem is found, contact the retailer to obtain a replacement.
7)
During transportation of the system, the cooler must be removed. Zalman is
not responsible for any damages that occur during the transport of a system.
8)
Product design and specifications may be revised to improve quality and
performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to
external causes, including but not limited to, improper use, problems
with electrical power, accident, neglect, alteration, repair, improper
installation, or improper testing.
2.
Specifications
Spec.
Material
Weight
Dimensions
Bearing-Type
RPM
FAN
Noise Level
Input Voltage
3.
Installation Requirements
1) Space Requirements
The cooler's installation requires an
unobstructed space of 120mm(width),
120mm(length), and 60mm(height), with the
CPU as a central reference point.
Please check if components such as ODDs
and PSU protrude into the required space.
WWW.ZALMAN.COM
Model
CNPS8900 Extreme
2 Ball-Bearing
1,250 ~ 2,800 RPM ±10%
19.5~35 dBA ±10%
Pure Copper and Aluminum
400g
120(L) X 120(W) X 60 (H)mm
1,000 ~ 1,500 RPM ±10%
12V
60 mm
CNPS8900 Quiet
Long Life Bearing
19~25 dBA ±10%
120 mm
120 mm
1
Advertisement
