Advertisement
1. Precautions
1)
Do not ingest the Thermal Grease, and avoid its contact with skin and eyes.
If contact is made with skin, wash off with water. If ingested or irritation
persists, seek medical attention.
2)
To prevent possible injuries, gloves must be worn while handling this product.
3)
Excessive force exerted on the fan may cause damage to the fan and/or
system.
4)
Use and keep product away from reach of children and pets.
5)
Check the components list and condition of the product before installation. If
any problem is found, contact the retailer to obtain a replacement.
6)
Zalman Tech Co., Ltd. is not responsible for any damages due to
overclocking.
7)
During transportation of the system, the cooler must be removed. Zalman is
not responsible for any damages that occur during the transport of a system.
8)
Product design and specifications may be revised to improve quality and
performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to
external causes, including but not limited to, improper use, problems
with electrical power, accident, neglect, alteration, repair, improper
installation, or improper testing.
2. Specifications
Spec.
Fan
Fan
Mate 2
3. Installation Requirements
The cooler's installation requires
an unobstructed space of 108
(width), 108 (height), and 69
(depth), with the CPU as a central
reference point. Please check if
components such as ODDs and
PSU interfere with the required
space.
1
Materials
Weight
Dimensions
Bearing
w/ Fan Mate 2
RPM
w/o Fan Mate 2
Noise Level
Input Voltage
Output Voltage
Max Capacity
Model
Pure Copper, Aluminum
108(L)
1,400 ~ 2,600rpm ±10%
69
CNPS8000A
330g
108(W)
66(H)
2 Ball-Bearing
2,800rpm ±10%
20 ~ 30dBA ±10%
12V
5 ~ 11V ±2%
less than 6W
108
.COM
108
Advertisement
