Table of Contents
Advertisement
The Network – Options screen is part of the web-based administration interface. See
chapter "Web-based Management" on page 32 for further details on using this inter-
face.
i
Viewers need to know this port number in order to connect and view live
video, so you must inform viewers of the current port number.
Router/Gateway Setup
Your router or gateway must be configured to pass incoming TCP (HTTP) connections
(from viewers) to the Gigaset WLAN Camera. The router/gateway uses the Port Number
to determine which incoming connections are intended for the Gigaset WLAN Camera.
This feature is normally called "Port Forwarding" or "Virtual Servers", and is illustrated
below. The Port Forwarding/Virtual Server entry tells the router/gateway that incoming
TCP connections on port 1024 should be passed to the Gigaset WLAN Camera. If neces-
sary, check the user manual for your router/gateway for further details.
i
If you are using more than one camera, each camera needs an own
second port.
Example: LAN configuration
IP address of the camera (default):
192.168.2.252
Second port enabled (1024)
Router / Switch
Advanced Viewing Setup
Camera access via LAN:
http://192.168.2.252
25
Advertisement
Table of Contents
