Table of Contents
Advertisement
Advanced Viewing Setup
Advanced Viewing Setup
After finishing setup via the Windows-based wizard, the Gigaset WLAN Camera can
immediately be used by all users on your LAN.
Refer to chapter "Viewing & Recording" on page 53 for details on viewing and recording
live video.
This chapter describes some additional settings and options for viewing live video:
u
Adjusting the video image
u
Controlling user access to the live video stream
u
Making video available from the Internet
u
Using the Motion Detection/E-Mail feature
Adjusting the Video Image
If necessary, the Gigaset WLAN Camera administrator can adjust the video image.
Settings are provided for:
u
Resolution – Select the desired size. The larger sizes require greater bandwidth.
u
Image Quality – This determines the degree of compression applied to the video
stream. Higher quality requires greater bandwidth.
u
Power line frequency – Select 50 Hz power line frequency, as used in your region.
The correct setting will improve the picture quality under fluorescent lighting.
u
Brightness – Adjust the brightness of the image, if the automatic setting does not
give satisfactory results.
– Red, Green, Blue intensity can be adjusted.
u
Time Stamp – If enabled, the time will be displayed on the video image.
u
Text Overlay – If enabled, up to 20 characters can be superimposed on the video
image. This is useful for identifying the camera.
u
Audio – If desired, audio can be included in the video stream.
ì
Connect to the web-based interface of the Gigaset WLAN Camera. (See chapter
"Web-based Management" on page 32 for details.)
ì
In the Administration menu, select Image. You will see the screen below.
20
Advertisement
Table of Contents
