Entering Characters; Osd Menu Settings; Camera Setup - Siemens CCDA1445 Installation Manual

Configuration

10.2.3 Entering characters

10.3 OSD menu settings

10.3.1 CAMERA SETUP

54
Building Technologies
Fire Safety & Security Products
To set e.g. preset titles or a password you have to enter characters.
1. Move the joystick to the right to enter the first character.
2. Move the joystick up or down to scroll through the characters.
3. Repeat the first two steps until you have entered all characters.
4. To cancel the entering and leave the option press <∞> (focus far).
5. To accept the entered characters press <O> (focus near).
The characters have been entered.
<FOCUS>
WB ATW
<AE>
ZOOM LIMIT X36
SHARPNESS 10
<LINE LOCK>
PRIVACY ZONE P1 OFF
<ALARM ACTIONS>
ALARM RETURN OFF
PICTURE FLIP OFF
WD OFF
Menu item Option settings
<FOCUS> See page [
WB (White Balance) ATW (Auto tracking white): Automatically adjusts the white balance
for colour temperatures from 2000°K to 10000°K.
AUTO: Automatically adjusts the white balance for colour
temperatures from 3000°K to 7500°K.
ONE PUSH WB: This can be set using 72 "Pos" from the keyboard
/ matrix.
<AE> See page [
ZOOM LIMIT The zoom limit can be controlled for Wide angle or Telephoto angle.
The maximum optical zoom is X36; higher values are for electronic
zoom only.
SHARPNESS The sharpness can be controlled from 0 to 15 (sharpest).
<LINE LOCK> See page [
PRIVACY ZONE 8 privacy zones can be set ON/OFF.
See page [
<ALARM See page [
ACTIONS>
55]
56]
57]
57]
58]
048_CCDA1445_A6V10257135_V1.0_en
20.08.2009