Table of Contents
Advertisement
You find the following informations:
System
Device Name
Description
F/W version
Network
MAC Address
IP Address
Network Mask
Gateway
Wireless
Network Type
SSID
Channel
Encryption
Video
Resolution
Current Viewers This shows how many viewers are currently viewing the video
Log
System Log
Restore Factory
Defaults
Refresh
Restart
This shows the name of the Gigaset WLAN Camera.
This shows the description of the Gigaset WLAN Camera, such as
location.
The version of the current firmware installed.
You can upgrade the firmware by clicking the Upgrade Firmware
button. Before updating, you need to obtain the firmware upgrade
file. Please refer to chapter "Upgrading Firmware" on page 52.
The current IP address of the Gigaset WLAN Camera.
The IP address of the Gigaset WLAN Camera.
The network mask associated with the IP address above.
The IP address of the remote gateway associated with the IP address
above.
It shows the network type currently in use (Ad-hoc or
Infrastructure).
This displays the wireless SSID.
This shows the wireless channel currently used.
This shows if the WEP or WPA-PSK encryption is enabled.
The image size of the video stream.
stream.
This is a log of system activity. Date, time and IP address of the video
access is noted in the text field.
Clicking this button restores the factory default configuration set-
tings.
Take over the current settings to the Status screen.
Restart the camera.
Web-based Management
51
Advertisement
Table of Contents
