Table of Contents
Advertisement
6.2
Function settings
6.2.1
PRESET
6.2.2
CAMERA SETUP
6.2.2.1 EXPOSURE
6.2.2.2 SHUTTER
Siemens Building Technologies
Fire Safety & Security Products
Press the ENTER of the OSD control button, the menu will appear on the display
and will disappear after 30 seconds if no any action. The shaded setting area
means an item selected and keeps blinking.
Select PRESET function
IN Door (2500 °K – 6500 °K),
OUT Door (2500 °K – 9500 °K), or
custom.
This camera provides 2 kinds preset environ-
ment settings. Which are IN Door and OUT
Door, User can do fast setting in these 2 kinds
environment parameter. OR, User can set envi-
ronment parameter by self in custom mode.
Using UP/DOWN key adjust cursor to PRESET
as shown in the figure. Press ENTER key to
enter modify mode, Using UP/DOWN key to
select mode after selected and press ENTER
key to leave modify mode.
Enter CAMERA SETUP submenu as shown in
the figure. Using UP/DOWN key adjusts cursor
to the item which wants to modify.
Press ENTER key to enter modify status , Using
UP/DOWN key to select
Mode. After selected and then press ENTER
key to leave modify Mode.
Setting ALC for Auto IRIS lens control or ELC for auto electronic shutter when
using manual IRIS lens. Move the cursor to the position and push ENTER.
Setting of slow electronic shutter (OFF to X 16).
Move the cursor to the position as shown in the
figure. Using the UP/ DOWN button, choose the
slow shutter from OFF to X16.
Install the camera
MAIN MANU
PRESET INROOM
<CAMERA SETUP>
<D/N SETUP>
<OPTION>
<OTHER SETUP>
<REMOTE>
<PRIVACY ZONE>
BLC ZONE OFF
SYNC MODE INT
EXIT CANCEL DEFAULT
CAMERA SETUP
EXPOSURE ALC
SHUTTER OFF
LENS LEVEL 5
WB MODE AUTO
GAIN 24
GAMMA 0.45
APERTURE MID
WD LEVEL 5
BACK
CAMERA SETUP
EXPOSURE ALC
SHUTTER OFF
LENS LEVEL 5
WB MODE AUTO
GAIN 24
GAMMA 0.45
APERTURE MID
WD LEVEL 5
BACK
19
08.2006
Advertisement
Table of Contents
