Current Recordings; Adding Cameras To The Camera List - Siemens A31008-M1026-R101 Manual

Viewing & Recording

Current Recordings

This panel lists all scheduled recordings currently in progress.
Any recording currently in progress can be terminated by selecting it and clicking the
Stop button.
Please refer to chapter "Viewing & Recording" on page 53 for more information.

Adding Cameras to the Camera List

ì
Open the WLAN Camera Utility.
ì
Click the Add Camera button on the left side of the main screen.
u
The Cameras List panel, on the left, displays all wireless cameras found on your
LAN/WLAN. This list can be updated by clicking the Refresh button.
u
The Camera Data panel, on the right, displays the data for the selected camera.
ì
Select a camera in the list on the left.
ì
Check if the Camera Data shown on the right is correct:
Device Name
Description
Address
56
This is the default name for the Gigaset WLAN Camera and cannot
be changed.
This displays the description entered by the Gigaset WLAN Camera
administrator.
The current IP address of the Gigaset WLAN Camera.