Palm TREO Treo 700wx Getting Started Manual page 78

8.
If the passkey is not built-in, enter the same passkey on
the smart device and the other Bluetooth device, and then
press Finish
9.
If you're connecting to a headset or hands-free car kit,
check the Hands Free box, and then press Finish
softkey).
Important:
10.
If you're connecting to a GPS device, press Finish
Ports tab, select the GPS device you selected in step 6, and then select New Outgoing
Port. (Press Finish
you can configure the GPS settings. See the Treo 700
information. Be sure to select the same port you have assigned for GPS here.)
11.
Press OK .
You can now communicate with this device whenever it is within range (about 30 feet) and
your smart device's Bluetooth feature is turned on (see steps 2 and 3 earlier in this section).
Wireless Features
(right softkey).
Some Bluetooth devices have a built-in passkey; others let you choose the
passkey. See the documentation for the Bluetooth device for more
information.
[right softkey]. After you set the partnership and COM port,
(right
(right softkey), select the COM
User Guide for more
WX
63