During a call, you can do any of the following:
Put the call on hold: Press Hold
Hold
(left softkey).)
Use the built-in speakerphone: Select Speakerphone
select
Mute the microphone so you can't be heard: Select Mute
back on, select Mute
Switch to another application: Press Start
Ending a Call
Press Power/End.
Press the headset button (if the headset is attached and has a button on it). (Some
headsets do not have a button.)
Saving Phone Numbers
After you complete a call, you are prompted to add the number if it is not already in your
Contacts list. If an incoming call uses caller ID blocking, you do not see the Add Contact
prompt.
To create a new contact for this number, select Create New Contact.
To add this number to an existing contact, select Copy and Add, and then select a
contact name.
To decline adding the number, press Dismiss
To permanently disable the Add Contact prompt, select Don't show this again.
30
.)
.)
.
(left softkey). (To take the call off hold, press Off
and select the application.
(left softkey).
. (To turn off the Speakerphone,
. (To turn the microphone
Basics