Warnings - Graco 16N664 Operation - Repair - Parts

Warnings

Warnings
The following warnings are for the setup, use, maintenance, and repair of this equipment. The exclamation point symbol
alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in
the body of this manual or on warning labels, refer back to these Warnings. Product-specific hazard symbols and warnings
not covered in this section may appear throughout the body of this manual where applicable.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and
explosion:
• Do not spray or flush with flammable materials. Use water-based materials only.
• Use equipment only in well ventilated area.
• Sprayer generates sparks. When flammable liquids are used near the sprayer, keep sprayer at least 20 feet
(6.1 meters) away from explosive vapors.
• Keep work area free of debris, including solvent, rags amd gasoline.
• Keep a working fire extinguisher in the area.
SKIN INJECTION HAZARD
High-pressure spray is able to inject toxins into the body and cause serious bodily injury. In the event that injection
occurs, get immediate surgical treatment.
• Do not aim the sprayer at, or spray any person or animal.
• Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with any part
of the body.
• Always use the nozzle tip guard. Do not spray without nozzle tip guard in place. Use Graco nozzle tips.
• Use caution when cleaning and changing nozzle tips. In the case where the nozzle tip clogs while spraying,
remove battery and follow the Pressure Relief Procedure for relieving the pressure before removing the
nozzle tip to clean.
• Do not leave the equipment energized or under pressure while unattended. Remove battery and follow the
Pressure Relief Procedure when the equipment is unattended or not in use, and before servicing, cleaning, or
removing parts.
• Check parts for signs of damage. Replace any damaged parts.
• This system is capable of producing 2000 psi. Use replacement parts or accessories that are rated a minimum
of 2000 psi.
• Always engage the trigger lock when not spraying. Verify the trigger lock is functioning properly. Do not carry
the tool with a finger on the trigger.
• Verify that all connections are secure before operating the unit.
• Know how to stop the unit and bleed pressure quickly. Be thoroughly familiar with the controls.
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
• Always wear appropriate gloves, eye protection, and a respirator or mask when painting.
• Do not operate or spray near children. Keep children away from equipment at all times.
• Do not operate the unit unless mentally and physically capable of following the equipment instructions.
• Do not overreach or stand on an unstable support. Keep effective footing and balance at all times.
• Stay alert and watch what you are doing.
• Do not operate the unit when fatigued or under the influence of drugs or alcohol.
• Do not alter or modify equipment. Alterations or modifications may void agency approvals and create safety
hazards.
• Make sure all equipment is rated and approved for the environment in which you are using it.
3A2853C
WARNING
WARNING WARNING WARNING
3