Troubleshooting - Graco 16N664 Operation - Repair - Parts

Troubleshooting

Troubleshooting
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury
from pressurized fluid, such as skin injection,
splashing fluid and moving parts, remove battery and
follow the Pressure Relief Procedure when you
stop spraying and before cleaning, checking, or
servicing the equipment.
Problem
Sprayer makes no sound when
trigger is pulled
3A2853C
Check everything in this Troubleshooting Table before
you bring the sprayer to an authorized service center.
Cause
Trigger is locked.
Sprayer status indicator light is solid
RED when triggering, indicating that
the battery charge is low, or the bat
tery is too cold.
Sprayer status indicator light is
flashing RED when triggering, indi
cating that the battery is too hot to
operate.
Sprayer status indicator light does
not light when sprayer is triggered.
Battery is not installed or is dam
aged.
Motor/control board kit has reached
maximum life.
Solution
Disengage trigger lock. See page 8.
Replace with charged battery and place
old battery in charger, or allow battery
to warm up.
Allow battery to cool.
Install battery or replace.
Replace motor/control board kit.
25