Table of Contents
Advertisement
note these important points about the
installation process:
When the language selection screen
•
appears, select the same language
you selected on your Treo 680.
WINDOWS ONLY
•
which desktop software you want to
use for synchronization:
Palm Desktop software or Microsoft
Outlook.
Whether you select to synchronize
NOTE
with Microsoft Outlook or Palm Desktop
software, Palm Desktop software is still
installed on your computer. If you use
Outlook as your desktop email application,
select Outlook as your desktop
synchronization software. Remember that
when you enter information on your
computer, enter it in the software you
selected in this step.
The install process prompts you to
•
connect your Treo 680 to your
computer. Go to the next section.
0
You can choose
Connecting your Treo 680 to your
computer
After you install the desktop software (see
Installing the desktop synchronization
software), you're ready to connect your
Treo 680 to your computer.
BEFORE YOU BEGIN
computer, you need the sync cable that
came with your Treo 680.
1 Plug the AC charger into a wall outlet.
2 Plug the USB sync cable into an
available USB port or a powered USB
hub on your computer.
For best performance, plug your sync
TIP
cable directly into a USB port on your
computer. If your computer has USB ports on
both the front and back, we suggest using the
back port; the front port is often a low-power
port. If you use a USB hub, make sure the hub
has its own power supply.
3 With the sync button facing up, connect
the sync cable to the bottom of your
Treo 680. Do not press the sync button
until you are instructed to do so.
S E T T I N G U P
To set up your
1
21
Advertisement
Table of Contents
