Palm 680 User Manual page 18

Palm pda user guide treo 680 smart device
Hide thumbs Also See for 680:
Table of Contents

Advertisement

1
S E T T I N G U P
1 Plug the AC charger into a wall outlet.
2 Connect the charger cable to the
bottom of your Treo 680. Make sure the
arrow on the connector is facing up,
toward the screen.
12
You can also trickle charge your
?
DID YOU KNOW
Treo 680 without the AC charger by
connecting it to your computer with the sync
cable. However, it takes longer to charge the
battery without the AC charger, and if your
laptop isn't plugged into a power source, it can
drain the laptop's battery. For the quickest
charge time, use the AC charger.
When trickle charging your Treo 680 with
TIP
the sync cable, the indicator light may not turn
on. To make sure the battery is charging,
check the onscreen battery indicator.
3 To confirm that your Treo 680 is
charging, check the indicator light on
your Treo 680.
Solid red indicates that your Treo 680
is charging.
Solid green indicates that your Treo
680 is fully charged.
Indicator light

Advertisement

Table of Contents
loading

This manual is also suitable for:

Treo 680 smart deviceTreo 680

Table of Contents