Palm Treo 700P User Manual page 52

3
Y O U R P H O N E
If the screen dims during a call, press any
TIP
key except Power/End to restore the screen
brightness. Be careful not to press Power/End
to restore the screen brightness because this
ends the call.
DID YOU KNOW
screen stays at full brightness during phone
calls. See Optimizing power settings for
details.
Use the 5-way
onscreen buttons.Here's what the buttons
do:
46
You can set how long the
?
or stylus to select the
Ends the call immediately. You
can also press the headset
button (if the headset is
attached).
Turns on the speakerphone.
When the speakerphone is on,
you can take the smartphone
away from your ear and use
other features during a call. For
example, you can check your
calendar or look up contact info.
Turns off the speakerphone
when it is on.
Replaces the Spkr-phone button
when a Bluetooth headset is
attached. Select this button to
transfer the call from the
®
Bluetooth headset to the
built-in earpiece.
Places the current call on hold.
Enables you to place another call
while the first call is on hold. For
information on handling a
second incoming call, see
Answering a second call (call
waiting).
Opens the Dial Pad so you can
manually dial additional
numbers, such as an extension
or a response to a voice prompt.