Unpacking Instructions; Grounding Instructions - Weston 08-0801-W User Manual

UNPACKING INSTRUCTIONS

. Remove all parts from packaging material and check to be sure there are no
missing parts.
. Retain packaging material for storage of the Grinder and Grinder parts when
not in use.

GROUNDING INSTRUCTIONS

FIGURE A
GROUNDING
This appliance must be grounded while in use
to protect the operator from electrical shock.
The appliance is equipped with a 3-conductor
cord and a 3-prong grounding type plug to fit
the proper grounding-type receptacle. The
appliance has a plug that looks like Figure
Grounding
Prong
A. An adapter, Figure B, should be used
for connecting Figure A plugs to two-prong
Circuit
Grounding
receptacles. The grounding tab which extends
Conductor
from the adapter must be connected to a
permanent ground such as a properly grounded
FIG RE B
outlet box as shown in Figure C using a metal
screw.
EXTENSION CORDS
Metal
Grounding
Screw
Use only 3-wire extension cords which have
3-prong grounding-type plugs and a 3-pole
Cover of
cord connector that accepts the plug from the
Grounded
appliance. Use only extension cords having
Outlet Box
an electrical rating not less than the rating of
the appliance. Do not use damaged extension
FIGURE C
cords. Examine extension cord before using and
replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect.
Keep cord away from heat and sharp edges.
Grounding
Means
AA2220
8