Long Nam Programming; Programmable Parameters - Ericsson EF738 Service Manual

Test/Service Programs

Long NAM Programming

Programmable Parameters

Electrical Serial Number (ESN)
The ESN, which is a unique binary number that identifies the MS to the cellular sys-
tem, is set by the factory and can not be modified.
Security Code
This code gives the user access to protected memory locations, resetting of menus,
and setting of call restrictions.
Roam Type
The roaming indicator can be set in three different modes: off, flashing, steady-on.
Subscription with Charge Rate
This parameter determines whether AirTime/CallCharge is selectable by the user.
Number of Channels
Defines the allowed number of channels according to the frequency band.
First Dedicated Control Channel in System A
This control channel number can be programmed in service mode for internal tests.
First Dedicated Control Channel in System B
This control channel number can be programmed in service mode for internal tests.
Total Number of Dedicated Control Channels in System A
Maximum number of dedicated control channels in System A.
Total Number of Dedicated Control Channels in System B
Maximum number of dedicated control channels in System B.
Number of Emergency Numbers
Determines the number (≤3) of available emergency numbers for the country.
Emergency Number 1
States the first emergency number.
Emergency Number 2
States the second emergency number (if exists).
Emergency Number 3
States the third emergency number (if exists).
Enquiry Number
States the enquiry number
Country International Prefix
Prefix required when dialing an international call.
This parameter detects an international call at call restrictions.
34