Table of Contents
Advertisement
Special Functions
Th& automaUf re-try (unction Is en-
ab[(^/dk&ai:}lBd ^ foUovvs;
1. Prefix M, fgliowd by 7 The cuf-
rent $etting, either RETHV OFF
or RETRY OM. appears.
2. Turn the automatic fe'lrv ON or
OFF by pressing ar>y nunneric key.
3^ SlOfO the nm setting by presshg
R/S,T*or#A
6.
NAM Selection
OpUonat functton.
The Dual NAM (Number Assignmenl
Module) Tadllty o( the phone allows
you lo subscribe to two cellular net¬
works. However, the phone can only
be active In one ot the two networks
al a tirm.
This Special Function lets you change
trom the phone rHjnnber registered in
Ihe one network, NAM1»to the phor>e
numl^r regcsterad In the other net¬
work, NAM2, or vNoe v^isa.
You can also select AUTO NAM. This
means that Itie phono number regis¬
tered tn the first network (NAM1) will
be used, provided that service \& avail¬
able from this network. It notn the
phor^ wllf automatlcaliy check to see
It servtee is avaltablo from the other
rtetwork. The phone will then use the
other phone number {NAM2) if ser¬
vice Is availeb^.
1. Press M, followed by 8. The cur¬
rent setting appears, either:
NAMI ONLY togecher with the
one nurriber, or
NAM2 ONLY together with the
other number, or
AUTO NAM
2. Press any numeric key (repeal-
adly) until the desired setting is
displayed.
3. Stem the new setting by pressing
R^S, T*or#A.
if one ptjone numbar onfy is
pfOgrAfttmed
info your
phone, NAM 1 ONLYmd
tho phone number wffi be
shown in the display. Press
€ or End to iea^e the Spe^
dal FuncHons^ or T* or#A
to go on fo another Special
FunclJon.
9.
Country Selection
Optional function.
If you can use your phone in more
than one court^, proceed as follows
to seloct country.
1. Press M. foyowed by
The name
of the present country appears.
2. Press any numeric key (repeat¬
edly) until the name of the
desired country is cAsplayed.
3. Store the new country by press¬
ing R/S.'V# Of #▲.
10.
Votce>Activated
Answering
This factility mff only be avaitabie if the
phone is used with handsfree equipment.
This ladlrty lets yc3u answer e catl by
using your voice. A confirmetjon beep
will sound when the Call Is connected.
1, Press M, aiKt then enter 10. The
cument setting, either VOICE OFF
or VOICE ON, appears.
2. Turn the Voice-Activated
Answering tadfity ON or OFF
by pressing any nunnafic key.
3^ Store the new setting by pressing
R^S,¥*or#A
47
Advertisement
Table of Contents
