Etacs Service Programs; Etacs Service Program; Hardware Requirements - Ericsson EF738 Service Manual

Test/Service Programs

ETACS Service Program

The ETACS Service Program is a tool used for entering the initializing customer
parameters into the EEPROM of the Ericsson mobile phone EF738.
This description of the ETACS Service Program includes information on:

• hardware requirements

• software setup
• programming instructions
Hardware Requirements
The following equipment is required when using the ETACS Service program for the
EF738 Ericsson mobile phone:
• PC with Windows 3.1 or Windows 95 operating system
• COM port (COM1 - COM2) available on the PC
• Programming cable, KRY 101 1135/10 R1A
• Programming interface, NTZ 112 311
• Adapter, 25- to 9-pin; for PC equipped with a 9-pin COM-connector
( not supplied by Ericsson)
.
Fully
charged 3
NTZ 112 311
battery
4
1 2
KRY 101 1135/10 R1A
17