Installing The Shell Program; Installing A Flasher Program - Ericsson EF738 Service Manual

Test/Service Programs

Installing the Shell Program

It is not possible to install a Flasher program unless the Shell program first has been
installed on the local hard disk or a network server.
To install the Shell program, proceed as follows:
4. Close all active windows and insert the Shell disk.
5. In the Program Manager window, click on File and Run,
6. After a while, some important information is displayed.
7. The shell program suggests a Destination Location in the directory C:\emma\
8. The copying of files is begun and also displayed by several graphs.
9. After completion of the file copying, the installation of the Shell program is
10.Confirm the completion by clicking OK in the Information window and remove
Note! The path and name of the Shell location directory must not be altered after
completed installation.

Installing a Flasher Program

After having the Shell program installed, the Flasher programs of various phones
based on the same platform are easily added:
1. Close all active windows and insert a Flasher disk.
2. In the Program Manager window, click on File and Run,
3. After a while, some important information is displayed.
4. The Flasher program suggests a path and subdirectory where the flasher pro-
5. The copying of files is begun and also displayed by several graphs.
6. After completion of the file copying, the installation of the Flasher program is
7. In the Program Manager a new window, EMMA, has been created, from which
44
type a:setup in the Command Line box, and click OK.
Read the information and click Next >.
If convenient, click Next >.
If not convenient, click Browse, select a suitable directory, and click Next >.
ended, but additional information can be retrieved by clicking Yes to the question
Do you want to view the README file now?
the disk.
type a:setup in the Command Line box, and click OK.
Read the information and click Next >.
gram is placed.
If convenient, click Next >.
If not, click Browse, select a directory path that corresponds with the Shell loca-
tion register, and click Next >.
ended. Confirm the completion by clicking OK in the Information window and
remove the disk.
the Flasher program now can be opened and started by clicking on the group icon
ETACS Flash.