Table of Contents
Advertisement
If the sound was output from the
speakers of the TV the previous time,
the system does not turn on even
when the TV is turned on.
The system turns off when the TV is
turned off.
Check the setting of [HDMI SETUP] –
[STANDBY LINKED TO TV] (page 35).
When [STANDBY LINKED TO TV] is set
to [ON], the system turns off
automatically when you turn off the
TV regardless of the input.
The system does not turn off even
when the TV is turned off.
Check the setting of [HDMI SETUP] –
[STANDBY LINKED TO TV] (page 35).
To turn the system off automatically
regardless of the input when you turn
off the TV, set [STANDBY LINKED TO
TV] to [ON]. The TV must support the
Control for HDMI function (page 48).
For details, refer to the operating
instructions of your TV.
No TV sound is output from the
system.
Check the type and connection of the
HDMI cable or audio cable that is
connected to the system and the TV
(page 23).
If your TV is compatible with Audio
Return Channel, make sure the
system is connected to an ARC-
compatible HDMI IN jack of the TV
(page 23). If sound is still not output
or if sound is interrupted, connect an
audio cable (not supplied) and set
[HDMI SETUP] – [AUDIO RETURN
CHANNEL] to [OFF] (page 35).
If your TV is not compatible with
Audio Return Channel, TV sound will
not be output from the system even
if the system is connected to the TV's
HDMI IN jack. To output TV sound
from the system, connect an audio
cable (not supplied) (page 23).
Switch input of the system to "TV"
(page 23).
Increase the volume on the system.
GB
60
Depending on the order in which you
connect the TV and the system, the
system may be muted and "MUTING"
lights up in display panel of the
system. If this happens, turn on the
TV first, then the system.
Set the speakers setting of the TV
(BRAVIA) to Audio System. Refer to
the operating instructions of your TV
on how to set the TV.
The sound is output from both the
system and the TV.
Mute the sound of the system or the
TV.
Change the speaker output on the TV
to TV speaker or Audio System.
The Control for HDMI function does
not work properly.
Check the connection with the
system (page 23).
Enable the Control for HDMI function
on the TV. For details, refer to the
operating instructions of your TV.
Wait a while, and then try again. If
you unplug the system, it will take a
while before operations can be
made. Wait for 15 seconds or longer,
and then try again.
Make sure the TV connected to the
system support the Control for HDMI
function.
The type and number of devices that
can be controlled by the Control for
HDMI function is restricted by the
HDMI CEC standard as follows:
Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up to
3 devices
Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to
3 devices
Tuner-related devices: up to
4 devices
Audio system (receiver/
headphone): up to 1 device (used
by this system)
Hide quick links:
Advertisement
Table of Contents
