Setting The Aux3; Setting The Aux3 Sel. (Switching The Visual Input Signal System); Rse Setting; Setting The Rear Seat Entertainment System - Alpine INE-W957A Owner's Manual

01GB00INE-W957A.book Page 55 Monday, April 21, 2014 7:49 PM

Setting the AUX3

Connection with external input devices is available through the iPod
VIDEO connector. An optional adapter cable is required (standard RCA
to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
You can also play back video connecting with an optional AV cable
(4-pole mini AV plug to 3-RCA).
Setting item: AUX3 In Sel.
Setting contents: iPod Video (Initial setting) / AUX3
iPod Video: Set when connected to an iPod or iPhone.
AUX3: Set when connected to an external input device.
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
• Please check pin-out carefully before use of this product. Depending
on the cable, there may be no picture and/or sound.
• When an iPod video is selected or the current source is AUX3, this
setting cannot be adjusted.
Setting the AUX3 Sel. (Switching the Visual
Input Signal System)
After setting to "AUX3" in "Setting the AUX3 In Sel.", this setting can
be carried out. The video input type can be changed.
Setting item: AUX3 Signal
Setting contents: Auto (Initial setting) / NTSC/PAL
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.
• When the current source is AUX3, this setting cannot be adjusted.

RSE Setting

[RSE] is selected on the Source setup menu in step 3. Refer to "Source
Layout Setting" (page 51).
Setting the Rear Seat Entertainment
System
Video and audio can be output to the rear monitor.
Setting item: RSE
Setting contents: Off (Initial setting) / On
• If you selected the "On" setting, set the "Remote Sensor Setting"
(page 41).
01GB05INE-W957A.fm
Setting the BLUETOOTH Pandora
(X008AU/INE-W957A only)
[BLUETOOTH Pandora] is selected on the Source setup menu in
step3. Refer to "Source Layout Setting" (page 51).
To use BLUETOOTH Pandora, set the BLUETOOTH Pandora setting
to "On."
Setting item: BLUETOOTH Pandora
Setting contents: Off / On (Initial Setting)
• When "On" is set, the BLUETOOTH Pandora
on the Top banner on the Audio/Visual screen.
• When the current source is BLUETOOTH Pandora, this setting
cannot be adjusted.

TuneIt Setting

[TuneIt] is selected on the Source setup menu in step 3. Refer to
"Source Layout Setting" (page 51).
Setting the Communication Mode with a
Smartphone
Set TuneIt to USB (iPhone) when an iPhone is connected, or set to BT
(Android) when an Android Smartphone is paired.
Setting item: TuneIt
Setting contents: Off / USB (iPhone) (Initial setting) /
*
BT (Android)
Off: No Smartphone is connected.
USB (iPhone): When an iPhone is connected to the unit's
USB port, you can programme the unit's sound
tuning parameters, or communicate with SNS.
BT (Android): Set this when an Android Smartphone is
paired with this unit via BLUETOOTH
technology. And after BLUETOOTH Audio is
connected, you can programme the unit's
sound tuning parameters, or communicate with
SNS.
* Not displayed when BLUETOOTH is set to Off. For details, refer to
"BLUETOOTH Setting" on page 56.
• For this function to work properly, specific applications must be
installed on your Smartphone before connection. Consult your
Alpine dealer or the Alpine website for details.
• Only the iPhone and certain Android Smartphones support this
function.
ALPINE INE-W957A 68-24567Z47-A (EN)
®
®
source is displayed
55
-EN