3.1
Cleaning the Printhead
Warning:
1. Turn 'off' the printer and open the cover.
2. Push the printhead latch back toward the back of the printer and
raise the printhead carrier assembly.
3. Using a cotton swab dipped in isopropyl alcohol, rub the cotton
swab along the printhead.
Note: The printhead should be cleaned every time a new roll of media
is installed.
Ovation 2
Maintenance
Turn 'off' the printer and unplug the unit from
the outlet before cleaning the printhead.
Figure 3-1 Cleaning the Printhead
29