Table of Contents
Advertisement
1 screws (4)
2 camera cable pull-tab
3 camera cable 4 display panel
6. Lift the display panel out of the display cover.
7. Remove the four screws (two on each side of the display panel) that secure the display panel brackets to the display panel and remove the display
panel brackets.
8. Turn over the display panel.
1 display panel brackets (1 left, 1 right) 2 screws (4 total; 2 on each side)
9. Using the display cable pull-tab disconnect the display cable from the display board.
1 display cable connector 2 display cable
3 display cable pull-tab
Replacing the Display Panel
1. Follow the instructions in
Before You
2. Connect the display cable to the board at the back of the display panel.
Begin.
Advertisement
Table of Contents
