Table of Contents
Advertisement
Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell Studio™ 1557/1558 Service Manual
Removing the Bluetooth Card
Replacing the Bluetooth Card
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
inside the computer.
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
Removing the Bluetooth Card
1. Follow the instructions in
Before You
2. Remove the palm rest (see
3. Remove the screw that secures the Bluetooth card to the system board.
4. Lift the Bluetooth card to disconnect it from the system board connector.
1
Bluetooth card
Replacing the Bluetooth Card
1. Follow the instructions in
Before You
2. Align the connector on the Bluetooth card with the connector on the system board and press the Bluetooth card until it is fully seated.
3. Replace the screw that secures the Bluetooth card to the system board.
4. Replace the palm rest (see
Back to Contents Page
Begin.
Removing the Palm
Rest).
2
screw
Begin.
Replacing the Palm
Rest).
Before Working Inside Your
Computer) before working
Advertisement
Table of Contents
