Removing The Smart Card Reader; Replacing The Smart Card Reader - Dell Latitude E4200 Service Manual

Back to Contents Page
Smart Card Reader
Dell™ Latitude™ E4200 Service Manual
Removing the Smart Card Reader
Replacing the Smart Card Reader
Removing the Smart Card Reader
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in Before Working on Your
2. Remove the service panel (see
3. Remove the WLAN and WWAN cards (see
4. Remove the memory module (see
5. Remove the solid state drive (see
6. Remove the LED cover (see
7. Remove the keyboard (see
8. Remove the module with Bluetooth
9. Remove the display assembly (see
10. Remove the coin-cell battery (see
11. Remove the palm rest assembly (see
12. Remove the system board assembly (see
13. Remove the M2 x 3-mm screw from the smart card reader.
14. Slide the smart card reader to the right to free the tabs from the base assembly, and lift the reader out of the base assembly.
1 smart card reader 2 base assembly
3 screw 4 tabs
Replacing the Smart Card Reader
Computer.
Removing the Service Panel).
Removing the WLAN/WiMax Card
Removing the Memory Module).
Removing the Solid State Drive and Cable
Removing the LED Cover).
Removing the Keyboard).
®
wireless technology (see
Removing the Display Assembly).
Removing the Coin-Cell Battery).
Removing the Palm Rest
Removing the System Board
and Removing a WWAN
Assembly).
Removing the Card With Bluetooth Wireless
Assembly).
Assembly).
Card).
Technology).