Dell Latitude E4200 Service Manual page 30

Back to Contents Page
Latitude ON™ Card
Dell™ Latitude™ E4200 Service Manual
Removing the Latitude ON Card
Replacing the Latitude ON Card
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE: The Latitude ON™ card is optional and may not be present in some computers.
Removing the Latitude ON Card
1. Follow the procedures in Before Working on Your
2. Remove the service panel (see
3. Disconnect the antenna cables from the card.
4. Remove the M2 x 3-mm screw.
1 antenna cables (2)
3 screw
5. Pull the card up to disconnect it from the system board connector.
1 Latitude ON card
Computer.
Removing the Service Panel).
2 Latitude ON card
2 system board connector