Removing The Heatsink Assembly - Dell Latitude E4200 Service Manual

Back to Contents Page
Heatsink Assembly
Dell™ Latitude™ E4200 Service Manual
Removing the Heatsink Assembly
Replacing the Heatsink Assembly
Removing the Heatsink Assembly
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in Before Working on Your
2. Remove the service panel (see
3. Remove the WLAN and WWAN cards (see
4. Remove the memory module (see
5. Remove the solid state drive (see
6. Remove the LED cover (see
7. Remove the keyboard (see
8. Remove the module with Bluetooth
9. Remove the display assembly (see
10. Remove the coin-cell battery (see
11. Remove the palm rest assembly (see
12. Remove the DC power cable (see
13. Remove the system board assembly (see
14. In sequential order, loosen the four numbered captive screws that secure the heatsink assembly to the system board, and carefully lift the heatsink
assembly away from the system board.
1 heatsink assembly 2 captive screws (4)
3 system board
Computer.
Removing the Service Panel).
Removing the WLAN/WiMax Card
Removing the Memory Module).
Removing the Solid State Drive and Cable
Removing the LED Cover).
Removing the Keyboard).
®
wireless technology (see
Removing the Display Assembly).
Removing the Coin-Cell Battery).
Removing the Palm Rest
Removing the DC Power Cable).
Removing the System Board
and Removing a WWAN
Assembly).
Removing the Card With Bluetooth Wireless
Assembly).
Assembly).
Card).
Technology).