License Plate Lamp; Replacement Bulbs - Chevrolet spark 2017 Owner's Manual

234 Vehicle Care

License Plate Lamp

1. Attachment Screws
2. License Plate Bulb
3. Bulb Socket
To replace a license plate
lamp bulb:
1. Remove the two screws (1)
from the license plate lamp
assembly.
2. Turn and pull the license plate
lamp assembly down.
3. Turn the bulb socket (3)
counterclockwise and pull it out
of the lamp assembly.
4. Pull the bulb (2) straight out of
the socket.
5. Push the new bulb into the
socket.
6. Install the bulb socket (3) by
turning clockwise into the
license plate lamp assembly.
7. Replace the license plate lamp
assembly by using the two
screws to secure.

Replacement Bulbs

Exterior Lamp
Number
Back-Up Lamps
Fog Lamps PSX24W
Front Turn Signal/
Parking Lamps
Front Sidemarker W5W LL
High/Low-Beam
Headlamp
License W5W LL
Plate Lamp
Rear Turn Signal/
Taillamps
Stoplamp/ W21W LL
Taillamps
For replacement bulbs not listed
here, contact your dealer.
Bulb
W16W
7444NA
H13
WY21W