Chevrolet spark 2017 Owner's Manual page 212

3. Lift the hood and release the
hood prop rod from the prop
rod retainer, which is under
the hood.
4. Securely place the hood prop
rod into the hood prop rod
holder, at the rear passenger
side of the engine
compartment.
To close the hood:
1. Before closing the hood, be
sure all filler caps are on
properly. Then, lift the hood to
relieve pressure on the hood
prop rod. Remove the hood
prop rod from the prop rod
holder in the rear passenger
side of the engine compartment
and secure it to the retainer on
the underside of the hood. The
prop rod must click into place
when returning it to the retainer
to prevent hood damage.
2. Lower the hood above the
vehicle and release it so it fully
latches. Check to make sure
the hood is closed and repeat
the process if necessary.
Vehicle Care 211