How To Change The Settings; Menu Screens - ResMed S8 elite User Manual

H C
OW TO HANGE THE
You can change settings on the
is in standby mode you can display a series of screens (a menu) on the LCD
S8 E
LITE
screen in order to view and change the settings for a particular function.
Your clinician will preset the menu to either a standard view or a detailed view.
See "How to Use the Standard Menu" on page 18 and "How to Use the Detailed
Menu" on page 20 for more information.
H
OW TO ENTER THE MENU SCREENS
When the
S8 E
LITE
in the left-hand corner. To select an
H
OW TO SCROLL THROUGH THE MENU
When you are in the menu, scroll through items by pressing the Up or Down keys.
H
OW TO CHANGE A SETTING OPTION
When you have scrolled to the item you require:
1. Press the Left key (Change).
2. Press the Up or Down keys until you see the setting option that you require.
3. Press the Left key (Apply) to select the setting option.
If you wish to exit without changing the option, press the Right key (Cancel).
H
OW TO EXIT OUT OF A MENU
Press the Right key (Exit). This will take you back to the standby (RAMP) screen.
H
OW TO EXIT OUT OF AN ITEM WITHIN THE MENU
Press the Right key (Exit).
H C
OW TO HANGE THE
During ramp time, the pressure increases from a low pressure to the prescribed
treatment pressure. You can set the ramp time in 5-minute intervals, from 0 minutes
(OFF) up to a maximum ramp time set by your clinician.
The standby screen displays the current ramp time in the right-hand corner. To change
the ramp time, press the Up or Down key until the desired ramp time appears.
Once a ramp time is selected, begin therapy by pressing the Start/Stop key.
S
ETTINGS
by using the keypad and LCD. When the
S8 E
LITE
standby (RAMP) screen is displayed you will see the word "menu"
S8 E
LITE
R T
AMP IME
menu, press the Left key.
H
OW TO USE THE
17
K
EYPAD