Charging The Battery; Installing The Fuse - Toro 20068 Operator's Manual

2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 7). Do
not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE
30W detergent oil with an API service classification
of SF, SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important:
Change the engine oil after the first
5 operating hours
; change it yearly thereafter.
Refer to Changing the Engine Oil.

4. Installing the Fuse

Procedure
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important: You cannot start the mower with the
electric starter or charge the battery unless you
install the fuse.
1. Unclip both ends of the battery cover and remove it
(Figure 8).
Figure 7
2. Insert the fuse into the fuse holder (Figure 9).
Note: Your mower comes with a fuse in the owner's
packet and another fuse in the battery box.
3. Install the battery cover.

5. Charging the Battery

Procedure
Refer to Charging the Battery in the Maintenance
section.
7
Figure 8
Figure 9